Lamp broken

If you receive this alarm, the Led Light is maybe broken or not connected properly. The alarm indicates that no / little power passes through the Led Light. Verify that the Led Light works by connecting it directly to a power source (e.g. battery). Make sure it is properly connected to the lamp pins on your FeedCon.

The Led Light can be tested by performing a new calibration (restart FeedCon required). If the light does not work, contact the Nordic Gamekeeper’s support.

NOTE: Be careful not to connect too powerful LED light since the system only tolerate LED light that consumes less than 5 A current (less than 60 W).

NOTE! You can get this alarm if you have lowered the settings on the led light strength to a very low %. Then you can ignore this alarm.